LANCOM 3850 UMTS
Chapter 3: Basic configuration
35
EN
Further information on TPC and DFS can be found in the LCOS refe-
rence manual.
3.2
Instructions for LANconfig
햲
Start up LANconfig by clicking
Start
Programs
LANCOM
LANconfig
. LANconfig automatically detects the new LANCOM devices in
the TCP/IP network.
햳
As standard, LANCOM Wireless Routers and LANCOM Access Points in
managed mode are
not
displayed by LANconfig carrying out its device
search. To display these devices, activate the option 'Extend search for
managed APs'.
햴
If an unconfigured device is being found during searching, the setup
wizard starts that will help you make the basic settings of the device or
will even do all the work for you (provided a suitable network environment
exists).
If the setup wizard does not start automatically, start a manual search
for new devices on all ports (if the LANCOM is connected via a serial
port) or in the network (
Device
Find
).
