LANCOM 3850 UMTS
Chapter 2: Installation
23
EN
���
DSL
Status of DSL connections:
���
UMTS
Status of UMTS connections:
Red
On (perma-
nently)
Error establishing the last connection
Orange/
green
In the housing
cover; blinking
alternately with
the power LED
At least one WLAN module is in managed mode and has not
found a WLAN Controller yet. The corresponding WLAN
module(s) is/are switched off until a WLAN Controller is
found to supply a configuration, or until being switched
manually into another operating mode.
Orange /
red
In the housing
cover; blinking
alternately with
the power LED
At least one WLAN module is in managed mode and has
found a WLAN Controller. However, the WLAN Controller
cannot assign a configuration because the firmware and/or
the device's loader version is not compatible with the WLAN
Controller.
Off
No DSL connection
Green
Blinking
Establishing the first connection
Green
Flashing
Establishing an additional connection
Green
On (perma-
nently)
At least one logical connection is established
Red
Blinking/Flas-
hing
Data traffic (TX or RX)
Off
No UMTS connection
Orange
Flashing
Login to the UMTS network active
Orange
On (perma-
nently)
Login to the UMTS network completed
Green
Blinking
Establishing the first connection
Green
Flashing
Establishing an additional connection
Green
On (perma-
nently)
At least one logical connection is established
Green
Blinking/Flas-
hing
Data traffic (TX or RX)
Red
Flickering
CRC error
Red/
Orange
Blinking
Hardware error
