LANCOM 3850 UMTS
Chapter 4: Setting up Internet access
44
EN
When using time-based billing, you can set the LANCOM Router to
automatically close existing connections if no data has been transfer-
red within a specified time (the so-called idle time).
In addition, you can activate a line monitor that identifies inactive
remote stations faster and therefore can close the connection before
the idle time has elapsed.
Active line monitoring can also be used with flat rate billing to conti-
nuously check the function of the remote station.
You also have the option of keeping flat rate connections alive if
required. Dropped connections are then automatically re-established.
4.1
Instructions for LANconfig
햲
Highlight the LANCOM Router in the selection window. From the menu
bar, select
Tools
Setup Wizard
.
햳
From the menu, select the
Setup Internet access
wizard and click
Next
.
햴
In the following window select your country and your Internet provider if
possible, and enter your access information.
햵
Depending on their availability, the wizard will display additional options
for your Internet connection.
