LANCOM 3850 UMTS
Chapter 2: Installation
24
EN
���
WLAN
Provides information about the WLAN connections via the internal WLAN
modules. The following can be displayed for WLAN link:
���
VPN
Status of a VPN connection.
���
ETH
LAN connector status in the integrated switch:
Off
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
Green
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Green
Inverse flashing
Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the input sensitivity.
Green
Blinking
DFS scanning or other scan procedure.
Green
Flashing
WLAN-Modul switched off due to fall below operating
temperature
Red
Flickering
Error in wireless LAN (TX error, e.g. transmission error
due to a poor connection)
Red
Blinking
Hardware error in the WLAN module
Off
No VPN tunnel established
Green
Blinking
Connection establishment
Green
Flashing
First connection
Green
Inverse flashing
Other connections
Green
On (perma-
nently)
VPN tunnels are established
Off
No networking device attached
Green
On (perma-
nently)
Connection to network device operational, not data traffic
Green
Flickering
Data traffic
Red
Flickering
Data packet collision
