121
CASSETTE PLAYER
To control the cassette player func-
tions through voice commands, say
“Cassette, tape” after pressing the
VOICE button
A
(
fig. 2
).
The cassette player functions that
will be controlled are the following:
– play next track
– play previous track
– fast tape forward
– fast tape rewind
– side change
– pause
– playback.
The voice prompts used by the sys-
tem to activate the cassette player
functions are the following:
Used voice prompts
I did not understand you.
Please say a command or say “Help”
For playing tapes you can choose from the
following commands: “Next track”,
“Previous track”, “Other side”.
To get more help, please say “Help general”
The following commands are available:
“Main page”, “Dark mode”, “Show arrows”,
“Zoom in”, “Zoom out”, “Repeat message”.
You can always activate a device with the
following commands: “Radio”, “CD player”,
“CD changer”, “Tape”, “TV”, “Telephone”.
You can always exit the dialog with
“Cancel”. Please say a command after the beep
There is no tape!
Sorry I did not understand you.
If you would like to say a new command,
please press the “Voice” button first
Action to take
Say a command or say “Help”
Say a command or say
“Help general”
Say one of the commands suggested
by the system or exit the dialog
Insert a tape in the cassette player
Error, procedure aborted.
To start a new procedure
press the VOICE button
and then say the required command
after the beep
103-131 connect thesis GB 22-10-2007 10:43 Pagina 121
