8
MULTIFUNCTION
INFORMATION DISPLAY
The system uses a graphic 7“, 16:9
LCD 256-colour TFT display with a
resolution of 480
x
234 pixels
(153.4
x
86.4 mm active matrix).
The display brightness can be
changed depending on the environ-
ment conditions and the driver’s
requirements, storing two settings,
day and night, which are can be set
manually by the user or automatical-
ly when turning on/off of the car
external lights.
GENERAL INFORMATION
The CONNECT system controls
and provides information for the fol-
lowing systems and functions:
– Sound system with radio, cassette
player, CD-ROM/Audio CD player,
CD-changer and voice commands
– colour TV set with voice com-
mands
– GSM cell phone with voice com-
mands
– Navigation system with voice
commands
– On-board computer
– Targasys assistance services and
functions.
The interface is the multifunction
information display for all the inte-
grated components.
TURNING THE SYSTEM ON/OFF
AND STAND-BY FEATURE
The system may be in one of the
following conditions:
– off, all functions disabled
– normal status, all functions are
active or can be enabled
– stand-by, functions partially
active and screen darkened.
Turning the system on
The system is turned on automati-
cally turning the ignition key or the
ignition switch knob to
MAR
. When
it is turned on the system is in the
condition that was active before the
last time it was turned off (excluding
the stand-by status that is not
restored).
When the ignition key is at
STOP
or removed or the ignition switch
knob is at
STOP
, the system is
turned on pressing the left knob or
the SOS key for the call for assis-
tance (to use the phone it is neces-
sary to enter the SIM card and the
PIN code, exception made for the
“emergency 112” call).
001-012 connect thesis GB 22-10-2007 10:38 Pagina 8
