118
RADIO
To control the radio functions
through voice commands, say “Ra-
dio” after pressing the VOICE button
A
(
fig. 2
).
The radio functions that will be con-
trolled are the following:
– band selection (AM-FM)
– “Autostore” function (see next
paragraph)
– tuning to the first station with
higher or lower frequency
– direct frequency selection
– stored station selection
– storing radio stations.
The voice prompts used by the sys-
tem during radio function activation
are the following:
Used voice prompts
I did not understand you. Please say a
command or say “Help”
To operate the radio, you can select from the
following commands: “Next channel”,
“Previous channel”, “Autostore”,
“AM”, “FM”. Commands such as:
“Frequency ninety-nine point five”,
“Channel number three”, “Store at number
three” are also possible.
To get more help, please say “Help general”.
The following commands are available:
“Main page”, “Dark mode”, “Show arrows”,
“Zoom in”, “Zoom out”, “Repeat message”.
You can always activate a device with
the following commands: “Radio”, “CD player”,
“CD changer”, “Tape”, “TV”, “Telephone”.
You can always exit the dialog with
“Cancel”. Please say a command after the beep
Sorry I did not understand you.
If you would like to say a new command,
please press the “Voice” button first
Action to take
Say a command or say “Help”
Say one of the commands
suggested by the system
Say one of the commands suggested
by the system or exit the dialog
Error, procedure aborted.
To start a new procedure press the
VOICE button and then say the
required command after the beep
103-131 connect thesis GB 22-10-2007 10:43 Pagina 118
