S8H Hi-Carb Superchiller
230V / 50Hz
www.lancerbeverage.com
Page 9 of 28
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No: 68000036
Images are for illustration purposes only as product may vary.
No. 111
– 4 Apr 22
Superchiller can be supplied with 5 pumps, dual carbonator, or 3 pumps single carbonator;
python should be connected to Chiller as follows:
5 Pump
3 Pump
SODA
RETURN A
WATER
RETURN
SODA
RETURN B
SODA
RETURN A
WATER
RETURN
SODA
SUPPLY A
WATER
SUPPLY
SODA
SUPPLY B
SODA
SUPPLY A
WATER
SUPPLY
Important
: Ensure lines from python to Superchiller connections are insulated to prevent
condensation.
Note
: For additional Soda reserve on short python lengths used in high volume accounts, it
may be necessary to extend the soda circuit by connecting the 2 spare lines in the python onto
the soda return line (i.e. double pass of soda circuit out and back from dispense point to soda
return).
3.5
Connecting to water supply
Warning
The connections to the mains water supply must be made in accordance
with the Plumbing Code of Australia and in accordance with AS / NZS
3500.1 and AS / NZS 3500.2. The dual check valve (backflow prevention)
supplied with this unit must be connected between the main supply
outlet and water inlet of appliance.
•
Using appropriate tubing and fittings connect a minimum 10mm water supply line from
Superchiller carbonator pump inlet to a filtered, regulated water supply. (See Postmix circuit
diagram page 11-13). Installation in accordance with AS/NZS 3500.1 and AS/NZS 3500.2.
•
Turn on water supply, check for leaks, adjust water regulator to 172-345kpa.
•
Purge the carbonator of air by lifting the relief valve until water discharges from the CO2
exhaust port. For dual carbonators, repeat this operation for each carbonator.
Caution
Maximum water supply pressure to be 345 kpa.
Normal operating water temperature should be within 7°C to 32°C.
S
O
D
A
S
U
P
P
L
Y
S
O
D
A
R
E
T
U
R
N
1
0
m
m
'
U
'
B
E
N
D
P
Y
T
H
O
N
