4
If necessary, shipping riser can be shifted to the center
of the bottom plate for ease of installation.
NOTE
9.
Connect tubing to water source then flush water lines to
check for leaks.
10.
Install water regulator and filter to water line and, if
necessary, install water booster (Lancer PN MC-163172)
between water supply and the unit.
11. Using tubing cutters, cut soda water line and install remote
carbonator per manufacturer’s specifications.
12.
Install a shut-off valve in the water line feeding the
carbonator pump deck.
A
B
A. Tubing
B. Soda Water Inlet
7. Route the soda water line manifold through the shipping riser
legs in the back of the unit.
8. Connect tubing of soda water line manifold to appropriate
inlets, at the front of the unit, using oetiker pliers and fittings,
(see
Plumbing Diagrams
on the front of the unit or on pages
10-11 for reference).
13. Route appropriate tubing from the syrup pump location
through the shipping riser legs in the back of the unit (See
Step 7).
14. Connect each syrup line to appropriate syrup inlet in the front
of the unit (see
Plumbing Diagrams
on the front of the unit or
on pages 10-11 for reference).
If installing a 6-Valve unit, two of the syrup lines will be
capped. DO NOT remove the caps from the two syrup
lines. See plumbing diagram for reference.
!
ATTENTION
15. Connect each syrup line to individual syrup pump outlet
fitting.
16. Install BIB (bag in box) connectors to the syrup supply line
tubing.
A. Syrup Supply Line
B. BIB Connector
C. BIB Syrup Container
A
B
C
Use proper connector for syrup manufacturer
!
ATTENTION
A. Syrup Supply Line
B. BIB Connector
A
B
17. Attach BIB connectors on syrup supply line to BIB. Repeat
for each syrup line/pump.
