Lampert Tools USA
2020
4
4.1 SET-UP OF THE DEVICE
The system is to be set up so that cooling air is able to
reach all of the surfaces of the housing without hindrance.
The device may not be covered! The device is to be
placed on a non-combustible surface! The device should
be set up on a base that is solid, level, and insulated -
ideally on a suitable workbench. Fasten the two hand
supports for the microscope with 2 Allen screws using the
supplied Allen key by inserting the screws into the
designated holes from underneath the microscope
baseplate and into the hand supports.
Summary of Contents for PUK U5
Page 1: ...Operating manual PUKU5 ...
