Lampert Tools USA
2020
28
- Do not point gun toward any part of the body, other
people, or any metal when threading welding wire.
MOVING PARTS can cause injury.
- Keep away from moving parts such as fans.
- Keep all doors, panels, covers, and guards closed and
securely in place.
H.F. RADIATION can cause interference.
- High-frequency (H.F.) can interfere with radio navigation,
safety services, computers, and communications
equipment.
- Have only qualified persons familiar with electronic
equipment perform this installation.
- The user is responsible for having a qualified electrician
promptly correct any interference problem resulting from
the installation.
- If notified by the FCC about interference, stop using the
equipment at once.
- Have the installation regularly checked and maintained.
- Keep high-frequency source doors and panels tightly
shut, keep spark gaps at correct setting, and use
grounding and shielding to minimize the possibility of
interference.
ARC WELDING can cause interference.
- Electromagnetic energy can interfere with sensitive
electronic equipment such as computers and computer-
driven equipment such as robots.
- Be sure all equipment in the welding area is
electromagnetically compatible.
- To reduce possible interference, keep weld cables as
short as possible, close together, and down low, such as
on the floor.
- Locate welding operation 100 meters from any sensitive
elec-tronic equipment.
- Be sure this welding machine is installed and grounded
according to this manual.
- If interference still occurs, the user must take extra
measures such as moving the welding machine, using
shielded cables, using line filters, or shielding the work
area.
Summary of Contents for PUK U5
Page 1: ...Operating manual PUKU5 ...
