© Lampert Werktechnik GmbH
2013
20
11. SPARE PARTS LIST
Hand piece
(40)
Nozzle (D 3mm)
(41)
Clamping nut
(42)
Chuck
(43)
Hand piece complete
Electrodes:
10 x electrodes D 0.6 mm (thorium oxide
free), incl. diamond grinding disk
Gas hose:
3m gas hose 6x4mm
DP100 150K
DP100 152
DP100 151
DP100 100
DP100 401
DP100 153
PLEASE NOTE!
Nozzle
(40), clamping nut (41), electrodes and clamping tongs (42) are wearing parts and are not covered by the
guarantee.
12. DISPOSAL INFORMATION:
Render discarded devices unusable by removing the
mains cable.
Only for EU countries: In accordance with EU directive
2002/96/EC regarding the disposal of used electrical and
electronic equipment, discarded electrical devices must be
separated and collected and sent for recovery in an
environmentally friendly manner.
13. EC – DECLARATION OF CONFORMITY
The manufacturer
“Lampert Werktechnik GmbH”
Ettlebener Str. 27, D-97440 Werneck
declares herewith that the following products:
"PUK D2" fine welding device and welding microscope
"SM D2"
comply with the stipulations of the directives identified
below - including any changes applicable at the time of
this declaration.
Applicable EC directives:
Per low voltage directive 2006/95/EC
Per EMC directive 2004/108/EC
The following harmonised standards have been applied:
EN 60974-6, EN 379, EN 169
EN ISO 12100-1
EN ISO 12100-2
Werneck, 01.03.2013
Lampert Werktechnik GmbH
Andrea Bauer-Lampert (Managing Director)
Text and illustrations represent the technical status at the time of printing. Subject to change.