14
Correct Method of Use
This product can use laminate films with size of card
※
~ A3. (Refer to P13)
If an inappropriate film is used, laminate may not be clearly done or the laminator can be broken.
Refer to details below when using this product to use appropriate laminate film.
※ Be careful about card size below 100mm since it is difficult to take out of the machine body.
Use appropriate laminate film
Laminate film
Do not install the paper as follows.
Paper
Paper
Patch
Appropriate margin is 3mm ~ 5mm on all 4
sides
Use laminate film slightly larger than the
paper (margin)
Do not place paper smaller than
laminate film at the center.
(There is a concern for film getting
caught)
Do not cut the laminate film. (There is a
concern for film getting caught)
If cutting is necessary, do so after laminate
work is done.
When laminating a small paper, place the paper as
close to the contact side of laminate film as
possible.
If the paper only touches a portion of contact side,
insert a patch to fill the remaining part of contact
side.
Summary of Contents for Lotus-14LK-H
Page 1: ......