11
Before Laminate Processing
There are two types of laminate film, 「roll type」 and 「pack type」.
This product uses 「pack type」 laminate film.
※ 「Roll type」 laminate film cannot be used.
Composition and thickness of laminate film
General film
Composition of film
Thickness of film
Turbo film (long side film) is a
film made for the purpose of
shortening processing work time.
Material and component of the
product are identical to general
films.
Insert laminate film into the laminator beginning with the contact side.
If non-contact side is inserted first, laminate film can get entangled by the roller and cause
failure of the machine.
Thickness of one side of laminate film in a pair is displayed.
In case of generally used 「250μ」 film, approximate total thickness after processing is
Thicknesses of pack type laminate films provided by our company are as follows.
Thickness is selected according to the purpose of use. 100μ film is widely used for general menus and
POPs.
This machine can handle 200μ ~ 350μ, but there is a concern for entanglement of 80μ ~ 150μ films if
they are handled improperly. Refer to P 15 for details.
Pack type laminate film is a set of two sheets that have a contacting side. Glue is applied on the inside.
Glue is melted using heat when passing through the laminate for adhesion.
Contact surface is generally on the short side, but there are some films that contact on the long side.
Glued surface
Contact side
Turbo film
Caution
Approximate total thickness = 「250μ (top)」 + 「thickness of paper」 + 「250μ (bottom)」
Summary of Contents for Lotus-14LK-H
Page 1: ......
