17
Laminate Processing
Refer to the following sequence during laminate processing.
When punctuating the laminate processing work with this product, preheat function can be used to
shorten time required to reach setting temperature for the next use.
Punctuated processing (STANDBY function)
Laminate processing sequence
Preparation of laminator
Press 【STANDBY】 button on the operation panel to set temperature to 80℃. Surface temperature of
the roller is maintained around 80℃.
Paper
STANDBY function
Insert paper into laminate film.
Insert laminate film into the laminator
Preparation of materials (paper and film)
About 3mm~5mm margin
Laminate processing complete
Laminate film
Press
【STANDBY】
button
in
HOT
setting
Check film margin
Insert contact side first
Temperature: 80℃
Speed: 1
Surface temperature is
maintained around 80℃
Temperature: 190℃
Speed: 2
Press
HOT
button
Set speed of the laminator.
Check the size of paper.
Prepare for laminate film appropriate for
the paper size.
Confirm that the laminator is heated to
setting temperature.
Set temperature according to paper.
Turn power on the rear side on and pull
the lever down.
Summary of Contents for Lotus-14LK-H
Page 1: ......
