background image

11

INSTRUCTION FOR THE USE

In case of breakdown and/or malfunctioning of the appliance, disconnect it avoiding any attempt of
repair or direct intervention.
Call exclusively professionally qualified personnel.

Any repair must be carried out by an after-sale service centre “LAMBORGHINI SERVICE” authorised by

the manufacturing firm, and using original replacements exclusively.

Non-observance of the above could compromise the guarantee and the safety of the appliance.

In order to guarantee the efficiency of the appliance and its proper operation it is indispensible to keep to

the manufacturerís directions, by ensuring the periodical servicing of the appliance is carried out by

professionally qualified personnel.

Check the hydraulic pressure of the installation on the hydrometer and that the indication, when the system

is cold, is within the limits set by the manufacturer: if one should find a drop in pressure request for an

inspection by qualified personnel.

After each reopening of the gas cock wait a few minutes before restarting the boiler

Do not leave the boiler switched on if it is not used for long time: in this case switch gas main supply,

electricity and water supply off by their own cocks and switches.

As soon as one decides not to use the appliance further, one should take care to render innocuous those

parts liable to be potential sources of danger.

As soon as one decides to disconnect the boiler definitively, one should ask qualified personnel to effect

the related works, then ensure that the main supplies have been disconnected.

For the power supply to the boiler the use of adaptors, multiple sockets or extensions is not permitted.The

use of a switch as indicated by the safety regulations in force must be provided.

The use of appliances which utilise electrical energy involve the observation of fundamental rules which

are:

a)

not to touch the appliance with parts of the body which are wet or when in bare feet;

b)

not to pull electrical wires;

c)

not to expose the appliance to the atmospheric agents;

d)

not to allow use of the appliance to children or the inexperienced.

In the case of structural work positioned near the flue pipe, turn off the boiler and at the end of the work

ensure that the efficiency of the flue exhaust is verified by qualified personnel.

On noticing the smell of gas do not touch any electric switch.Open all doors and windows. Shut off the gas

cocks and call qualified personnel.

Summary of Contents for XILO T 24 M W TOP








































Reviews: