Vega Customer Applications Manual
Section 10 - Combining Modules
Rev. A3: October 2003
Page 40 of 48
Each of the two option boards have the following pin out.
Pin No
Function
1
Unused.
2
Module Good E
3
+Ve Sense. *1
4
Module Good C
5
Starpoint Parallel.
6
Unused.
7
Starpoint Parallel.
8
Module Inhibit -Ve
9
-Ve Sense. *1
10
Module IVe
The "N" option is also available for a twin slot module :
T
he pinouts are as follows for of the two molex connectors on the twin slot module:
Pin No
Function
1
Module inhibit -VE
2
Module iVE
3
Module good E
4
Module good C
5
-VE sense.
6
+VE sense.
PIN 6
PIN 1
Mating connector information:
Note: housing and pins supplied with each
power supply.
Housing: Molex 51110-1060
Crimp pin: Molex 50394-8051
Hand Crimp Tool: 69008-0959 (Europe or
Japan) Or 11-01-0204(USA)
Mating connector information:
Note: housing and pins supplied with
each power supply.
Housing: Molex 50-37-5063
Crimp pin: Molex 08-70-1039
Hand Crimp Tool: 11-26-0167
(Japan)
Or 11-01-0194(Europe or USA)
9 7 5 3 1
10 8 6 4 2
