Lambda SR1, Operation Manual, Page: 311 / 317

SR1 Reference 311
© 2014 Stanford Research Systems
when installing it into a rack. See the diagram below for details on installing the rack mount brackets.
1. (Optional) Attach the handles to the rack mount brackets with two 8-32 x 3/8” flat head screws for
each bracket.
2. (Optional) Remove the feet and bail from the bottom of the instrument. Turn the instrument onto its left
side and remove the 6 screws that attach the feet to the bottom of the instrument. Rotate the
instrument back onto its bottom.
3. Remove the front two 10-32 x 3/8” truss head screws on both the left and right side of the instrument.
4. Install one bracket on the right side of the unit using two 10-32 x 1/2” truss head screws. Install the
other bracket on the left side of the unit with the washers between the bracket and SR1 using two 10-
32 x 1/2” truss head screws.