Lambda SR1, Operation Manual, Page: 162 / 317

SR1 Operation Manual 162
© 2014 Stanford Research Systems
The IMD Analyzer Panel
Generator Selection
The Generator control selects the generator that will be used for the test. Typically the analog generator
will be selected with analog inputs and vice versa, however, cross domain measurements are possible
on ADC and DAC devices by selecting a different generator. The selected generator must be using the
IMD waveform for the analyzer to function properly. The choice of generator waveform: SMTPE, CCIF, or
DIM dictates the analyzer configuration and is displayed in the readout below the generator selection.
IMD Product Selection
For each type of IMD Measurements the "IMD Product" control determines the particular IMD products
that will be included in the measurement. The table below summarizes the available choices: