Lambda SR1, Operation Manual, Page: 228 / 317

SR1 Operation Manual 228
© 2014 Stanford Research Systems
the ethernet network. Ethernet addresses and port assignments are configured using the switchers' web
interface.
The "Networks" tab of the Switcher Configuration Panel displays the attached switchers by function:
BNC ouput, BNC input, XLR output and XLR input. SR10 switchers are used for XLR inputs and SR11
switchers for XLR outputs while SR12 switchers can be used for BNC inputs and ouputs. Opening the
node corresponding to one of the switches displays the state of each connector on that switch box:
In this output switch example, output A is connected to connectors 1, 2, and 3 and output B is
connected to connectors 4, 5, and 6. Double clicking on the one of the connectors toggles its status
between no connection (icon is dark), connected to the A output (icon is green) and connected to the B
output (icon is red). The connection status can also be set by right-clicking on one of the connector
icons. Note that for an output switch the output can be simultaneously connected to several of the
switchbox connectors. For an input switcher only one of the connectors can be connected to the input at
a time. The numbers to the right of the connector icons identify the physical connector ID for that switch