Lampert Werktechnik GmbH
OPERATING MANUAL PUK D5
Gas valve:
Pressing the gas valve symbol on the display opens the gas valve. This function is important in order to set
the correct gas flow on the flow regulator. Pressing the button again causes the gas valve to close once more.
Pressing every other symbol on the display or pressing the multifunctional controller closes the gas valve
automatically.
Filter test:
Pressing the symbol activates a function test of the eye protection filter. The eye protection filter is closed.
Pressing the symbol again ends the test and opens the protection filter once more.
LED light:
Pressing the LED lighting symbol enables the brightness of the LED lamp on the welding microscope to be
adjusted in three brightness steps, or switched off completely.
Expert menu:
The expert menu can be activated or deactivated here. If this menu is active, it appears as an additional user
level.
Program memory:
You can activate or deactivate the saving and calling functions for programs that you created yourself here.
If this menu is activated, it appears as an additional user level.
Fixing:
Pressing this button activates or deactivates the operating menu for fixation welding. If this menu is activated,
it appears as an additional user level.
Micro:
Pressing the symbol allows the micro-mode to be activated or deactivated. If this menu is activated, it appears
as an additional user level.
Retention:
Pressing this button activates or deactivates the operating menu for retention welding. If this menu is
activated, it appears as an additional user level.
Welding sequence:
Pressing the symbol enables preselection of a "standard" or "short" basic welding cycle. If “short” is selected,
the gas pre-flow time is shortened and it is possible to trigger a series of welding points in quicker succession.
Language:
Pressing the symbol enables the system language for the welding device to be set. It is possible to toggle
between the languages German (DE), English (EN), Spanish (ES), French (FR), Italian (IT) or Russian (RU). The
messages descriptions are then displayed in the language that is currently set.
Welding beep:
Pressing the symbol enables activation or deactivation of the signal tone before welding.
19
