Lampert Werktechnik GmbH
OPERATING MANUAL PUK D5
Repair all safety equipment that is not fully functional before switching on the device. Never bypass safety
equipment or render this inoperable. Before switching on the device, ensure that this will place no one at risk.
The device must be checked for externally visible damage and the functionality of the safety equipment at
least once every week. Always safely erect shielding gas canisters such that these are stable and secure.
4.14 Original spare parts
In the case of parts sourced from third parties, there is no guarantee that these are designed and manufactured
to meet the stress and safety requirements.
♦
Only use original spare and wearing parts (also applies to standard parts).
♦
Changes, modifications and additions to the device are prohibited without the approval
of the manufacturer.
♦
Exchange parts immediately if these are not in flawless condition.
♦
When placing an order, cite the precise designation and part number in accordance with the spare part
list, as well as the serial number of your device.
The housing screws constitute the protective conductor connection for earthing the housing parts.
4.15 Safety-related checks
The manufacturer recommends performing a safety-related check on the device at least every twelve months.
A safety-related check by a qualified electrician is recommended
♦
after a modification
♦
after an installation or conversion
♦
after repair and care
♦
at least every twelve months.
When performing a safety-related check, observe the respective national and international standards and
directives.
4.16 Disposal
Do not dispose of this device with household waste. In accordance with the European directive regarding the
disposal of used electrical and electronic equipment and its application within national law, used electrical
devices must be collected separately and sent in for recycling in an environmentally friendly manner. Make
sure that you return your used device to your dealer, or obtain information regarding your local, authorised
collection and disposal system.
4.17 Safety labelling
Devices with a CE mark satisfy the fundamental requirements of the low voltage and electromagnetic
compatibility directive (e.g. relevant product standards from the standards series EN 60 974).
Lampert Werktechnik GmbH declares that the device satisfies directive 2014/53/EU. The complete text
of the EU declaration of conformity is avalable at
www.lampert.info
Devices bearing the CSA test mark satisfy the requirements of the relevant standards for Canada and the USA.
11
