Lake Shore Model 642 Electromagnet Power Supply User’s Manual
1-8
Introduction
Safety Summary (Continued)
Do Not Substitute Parts Or Modify Instrument
Do not install substitute parts or perform any unauthorized modification to the instrument. Return the instrument to an
authorized Lake Shore representative for service to ensure that safety features are maintained.
Prevent Cooling Water Condensation
Do not operate the power supply when cooling water temperature is at or lower than the dew point for local
atmospheric conditions. Condensation on cooling water lines inside the power supply can cause severe damage.
Refer to Section 2.4.4 for additional details.
Cleaning
Do not submerge instrument. Clean only with a damp cloth and mild detergent on exterior surfaces only.
Moving and Handling
Four handles are provided for ease of moving and handling the Model 642. The handles can be used in place of
lifting lugs when cloth straps are used. Always use all four handles when moving the unit. Because of its weight, the
Model 642 should be handled by mechanical means. If for some reason it is necessary to move it by hand, a minimum
of two people is required.
CAUTION:
To avoid injury to personnel, always observe proper lifting techniques in accordance with OSHA and
other regulatory agencies.
