8
ASSEMBLING YOUR STEAM MOP AND USING FOR
THE FIRST TIME
• Unpack the Steam Mop and remove all the packaging materials.
•
Do not
insert the plug into an electrical socket or turn on the Steam Mop until you
have fully assembled it.
• Insert the handle into the main unit as shown
making sure that the locator button lines up with the
two small holes on the reverse of the main unit and
clicks into place.
• To remove the handle, insert a fine pin into the first
small hole on the back of the main unit, push the pin in
while removing the handle by lifting it upwards.
• Place the microfibre floor pad on the floor with the
fastener strips facing upwards.
• Align the Steam Mop head with the microfibre
floor pad making sure that the hook and loop
fasteners secure the microfibre floor pad in place.
• Push the Steam Mop head firmly down on to the
microfibre floor pad.
Do not
use the Steam Mop without the microfibre
floor pad attached.
•
Wrap the power cord around the cord storage hooks and slot the end into the cord
holder.
