12
LOW WATER TANK
1. When the system detects that there is no water in the water tank, the steam mode
icon flashes white. After about 10 seconds, it will automatically power off.
2. Switch off and unplug at the socket and refill the water tank.
DESCALING
• When the product detects descaling is required, the descaling icon on the display
panel illuminates.
• When the descaling icon is on, please clean the product according to the method
shown below to avoid affecting the service life and normal operation of the appliance.
• After the cleaning is completed, the descaling icon goes out, the appliance enters
the standby mode and the program set time is cleared.
DESCALING METHOD
1. Put water mixed with white vinegar at a ratio of approximately 1:2 (about 300ml)
into the water tank. Long press the togglebutton for about 3 seconds, and the
product will automatically enter the descaling mode. During cleaning, the Lakeland
logo and on/off icon will be illuminated and the descaling icon will flash.
After descaling, it will enter the standby mode.
2. Fill the water tank with clean water and use the descaling mode again to avoid
vinegar residue.
3. During descaling, the appliance will emit a strong vinegar smell, which is a normal
and it is recommended this procedure is done in an open well ventilated place.
