Laing Innotech GmbH + Co. KG Althuette Germany Instruction LTC 11
- 18 -
When a keyboard is paired with more controllers, all controllers will start moving,
once they get the command by the keyboard. However, while the controllers start
and stop simultaneously, they will not be synchronized.
When more than one keyboard is paired to a controller, always the keyboard
pressed first, controls the controller. If another keyboard is pressed while the
movement, initiated by a keyboard is still in progress, this will not have any
effect.
Key functions, the key must be pressed and kept pressed:
Up Arrow:
Table will move upwards
Down Arrow: Table will move downwards
“1” Key:
Table will move to memory 1 position
“2” Key:
Table will move to memory 2 position
Battery change
Once the controller will not react any more to the control panel the battery in the
control panel has to be changed. To do so, a blade has to be carefully inserted
between the top cover and the surface, the control panel is glued to, to lift off the
top cover. Then the battery can be changed on the PCB. It must be made sure,
that the key designation matches the printed designations on the PCB when the
cover is put back on the device.
Mains connection
After the connection of the motors and the control panels the controller can be
connected to the mains by plugging in the power supply cable to the connector
shown on the picture.
Make sure the power cable will be placed in a way what provides stain relief
to the plug so that the plug cannot be pulled out of the controller.
