Instruction LTC 11 Laing Innotech GmbH + Co. KG Althuette Germany
- 17 -
Wireless control panel
Connection:
The wireless keyboard LM4RW can be connected to any controller what is
equipped with a BLE Module. Make sure the BLE Module in the controller is
activate through the Wizard or LD control panel before you go further.
Besides the wireless control panel additional control panels can be connected to
the controller.
Mounting:
It is mandatory, that the keyboard will be mounted in a position, from where
the movement of the table can be observed while pressing!
The LM4RW will be supplied with an adhesive tape on the bottom. Peel off the
protective film and glue the keyboard to the desired place. The place should not
be further away of the controller than about 5 feet. Where required the control
panel can be fixed with a screw too.
Pairing of the control panel to the controller
After plugging in to the mains, the controller it is ready for pairing for the first 15
seconds. If the controller is plugged in already, make sure, when you unplug it, to
wait until the LED in the controller goes off, so wait about 20 to 30 seconds and
only then plug it back in!
While the controller is ready for pairing, press the keyboard „UP“ and „Down“
keys on the control panel simultaneously, until you hear a sound from the motors
connected to the controller. If the melody goes upwards, the keyboard is paired to
the controller. Now the controller can be controlled by the keyboard.
When the keyboard has been paired to the controller before already, the pairing
action will result in an unpairing of the keyboard. This is indicated by a
descending melody given out by the motors. After being unpaired the controller
will not react to the keyboard commands any more.
The pairing can be started through the wizard too, on the „basic“ page. There the
pairing mode can be activated in the controller, pressing the „UP“ and
„Down“ key of the keyboard simultaneously within 15 seconds of activation of the
controller, will have the same effect as described above.
Up to 15 keyboards can be paired with one controller, and a keyboard can be
paired with an unlimited number of controllers.
To connect another keyboard or to connect the keyboard to another controller,
perform the described pairing procedure again with a different keyboard or a
different controller.
