Instruction LTC 11 Laing Innotech GmbH + Co. KG Althuette Germany
- 25 -
User height limit adjustment by “LM” control panels
Adjusting upper and lower limit
Should window boards or drawer container limit the possible movement of the
table, then an upper and lower limit can be defined as follows
•
Move the table top by use of the arrow keys to the maximum or minimum
desired height
•
Press the left arrow key 4 times quickly one after another
•
Reaching the program mode will be confirmed by a sound
•
Press the right arrow key shortly twice
•
Reaching the limit adjustment menu will be confirmed by two sounds
•
Then
o
If the maximum height should be defined press the “up” key. The
successful adjustment of the new upper limit will be confirmed by
two sounds
o
If the minimum height should be defined press the “down” key. The
successful adjustment of the new lower limit will be confirmed by
two sounds
Attention: The top and lower positions must keep a minimum distance so
that the table can still move after the new limits have been adjusted. This
minimum distance is defined in the parameter set entered into the
controller. Saving a new upper or lower limit is not possible if the minimum
distance is not maintained. In this case when pushing the appropriate
arrow key to save the new limit the following short beeps can be heard,
indicating that the new limit was not saved. In this case the distance
between the upper and lower limit must be increased.
Delete user height limits
•
Move the table top to the upper or lower limit by use of the arrow keys
(press the key until the table stops as the adjusted limit is reached)
•
Press the left arrow key 4 times quickly one after another
•
Reaching the program mode will be confirmed by a sound
•
Press the right arrow key shortly twice
•
Reaching the limit adjustment menu will be confirmed by two sounds
•
Then
o
If the table top is at the upper position and the adjustment for the
upper position shall be deleted press the “up” arrow key.
o
If the table top is at the lower position and the adjustment for the
lower position shall be deleted press the “down” arrow key.
•
Successful deletion of the position will be confirmed by a sound