laguna Plasma Level 2 CNC, Owner'S Manual

Page: 33 / 160

33
4.) Unloading-
1.) It is important that the machine is lifted only at the specified lifting points.
2.) Verify that the machine is balanced and stable before and during lifting/moving.
3.) Verify that no person is in a position where they may become trapped or injured. The machine
is shipped with the gantry installed and CNC control as one unit. The CNC control and the gantry
will be secured off-centered on the cutting table bed.
The machine is shipped with the gantry installed and CNC control as one unit. The CNC control
and the gantry will be secured off-centered on the cutting table bed.
CAUTION: Extreme care must be taken when lifting and moving the machine. Obtain
the weight of the machine.
NOTE:
It is the responsibility of the customer to verify that the forklift truck and/or crane is
of adequate lifting capacity, and that any maneuver is undertaken safely. Damage
caused to the machine through incorrect or careless maneuvers is not covered under
the machine warranty. Laguna Tools is not responsible for personal injury to any
person while this machine is transported, unloaded, or installed.
CAUTION: Make sure the load is always lifted about the center of gravity to prevent
from any tipping and accidents.