laguna Plasma Level 2 CNC, Owner'S Manual

Page: 4 / 160

4
Safety Instructions for Use-
INTRODUCTION-
Read this chapter on safety and the sections of vendor components manuals on safety before
beginning to operate the Laguna Tools Plasma Level 2 Cutting Table.
Do not become complacent about safety or completely dependent on safety devices.
SUPERVISORS: It is very important that a safe and appropriate working environment is provided
for this equipment and in compliance with applicable federal and local industry standards.
It is imperative that programmers, machine operators and maintenance personnel be trained
adequately in the use and care of the equipment. These employees should receive the proper
instruction to have a complete understanding of the operation of this machine before beginning
to program, operate or service it.
Careful programming and debugging of new programs are essential for successful operation of
this machine. Use program Stop Codes to stop machine motion for operator removal of parts or
scrap.
Never allow operators to place any part of their body into the machine while the machine is
active. Ensure that all personnel understand the function and use of
“ EMERGENCY STOP” and
“CYCLE STOP Button” .