laguna 14-Twelve Bandsaw, Manual

Page: 22 / 68

22
that you feel is unsafe or that you do not have the physical capability of achieving,
as the bandsaw is heavy.
You will probably find it easier to assemble the stand to the bandsaw prior to fitting
the other part (table, etc.), as it is lighter.
With the stand aligned to the bandsaw, fit the fixing screws and fully tighten.
Trunion clamp stud
Tilt stop bolt
It is possible to fit the table to the bandsaw with one person but far easier if you
have two people, one to lift the table and one to guide the trunion clamp studs.
Tilt blanking disc
Tilt stop bolt
Table tilt hole
Tilt blanking disc
The table has a reference stop bolt that is used to quickly align the table after tilting.
The stop bolt hits the tilt-blanking disc when it is positioned over the table tilt hole.
When the tilt blanking disc is moved away from the hole, it allows the tilt stop bolt to
pass through the table tilt hole, and the table can be moved to the maximum amount
of tilt (7 degrees).
Fitting the table to the bandsaw