20
2.
Fit the front swivel wheel on the stand as shown by bolting in position through the
stand onto the support bracket. Do not fully tighten the screws, as the height of the
wheel will have to be adjusted to suit the stand.
3.
Fit the spring onto the shaft and then screw the wheel onto the shaft
5.
Fit the back mobility wheel bracket level with the base of the stand as shown.
Note.
Do not fit the two leveling feet to the back of the stand.
6.
Turn the stand the correct way up so
that it sits on the wheels and the leveling feet.
Fixing screws No leveling feet fitted
Back mobility wheel assembly
Summary of Contents for 14-Twelve Bandsaw
