18
2.
Lift the bandsaw out of the packaging. You will need two or more people, as the
bandsaw is heavy.
3.
Lift the bottom Styrofoam out and remove the parts that are packaged under the
bandsaw and packaging.
Fixing bolts
Stand viewed from inside
The stand consists of two sets of panels.
Two side panels and two back/front
panels.
1.
Assemble the panels with the fixings
supplied.
2.
Turn the assembly upside down and fit
the feet one per corner as shown.
The height of the feet is not important, as
they have to be adjusted once the stand is
fitted to the band saw. It is recommend
that the feet be screwed in all the way with
the lock nuts left loose.
Note.
If you have purchased the optional
mobility kit, it should be fitted now
(detailed below).
Note.
If a mobility kit is being fitted, only two leveling feet will be required, as the
back wheels are used to stabilize the bandsaw.
Leveling feet
Assembling the bandsaw stand
Assembly and Set Up
Summary of Contents for 14-Twelve Bandsaw
