laguna 14-Twelve Bandsaw, Manual

Page: 25 / 68

25
1. Fit the fence bar to the table with the screws
and spacers suppliers.
Note. The distance between the fixing holes and
the end of the bar is different, and the end that
has the longest distance must be at the back of
the bandsaw (closest to the column).
2.
Slide the fence support onto the fence bar and
fit the fence support clamp screw.
3. Slide the fence onto the clamping strip.
4. Lift the fence just clear of the table and secure
in position with the clamping screws.
The fence support and the fence are held off
the table with a nylon-support Allen screw.
This screw ensures that the fence and the
fence support do not damage the table. The
screw is adjustable to compensate for ware.
Note. The fence clamp screw is shown
removed.
The machine is supplied with a removable
table insert that is held in position with a
screw. The table insert is removed when
blades are removed or fitted to the machine. The
insert is made of soft aluminium so that if the
blade wanders and contacts the insert, there is
less chance of damaging the blade. Adjusting
screws are provided to adjust the insert vertically
level with the table. The insert comes factory set,
but should adjustment become necessary, place
the insert in the table with the screw fitted. Place a
straight edge across the table and insert and
adjust the screws so that the table insert is level
with the top of the table.
Fence in high position
Allen key
Support Allen screw
Table insert
Fitting the table insert