Laguna Tools SmartShop Maker, Owner'S Manual

Page: 62 / 70

SmartShop|Maker Owner’s Manual
62
Error Code Potential Issue(s) Resolution(s)
GOTO label must be integer Program error
Check the machining program
and input integer to GOTO label.
ASIN()/ACOS() operand must
between -1.0 and 1.0
Programming error Check the machining program.
SQRT() operand should not
be negative
Programming error
Check the program; enter a
positive value in SQRT operand.
L address should be integer Programming error
Check the program and L
address in integer.
O address should be integer Programming error
Check the program and use O
address in integer.
M address should be integer Programming error
Check the program and use M
address in integer.
Spindle speed, S, should be
integer
Programming error
Check the program and use the
speed S of spindle in integer.
Tool length number, H,
should be integer
Programming error
Please check the program and
use tool length number H in
integer.
Tool radius number, D,
should be integer
Programming error
Please check the program and
use the tool radius number D in
integer.
Tool selection number, T,
should be integer
Programming error
Please check the program and
use the tool number T in integer.
Sub-program number, P,
should be integer
Programming error
Please check the program and
use the sub-program number P
in integer.