Laguna Tools SmartShop Maker, Owner'S Manual

Page: 61 / 70

SmartShop|Maker Owner’s Manual
61
Error Code Potential Issue(s) Resolution(s)
Radius compensation cancel
at arc
Programming error
Please check the machining
program.
Radius compensation startup
at arc
Programming error
Please check the machining
program.
Wrong direct draw command
usage
Programming error
Check machining program to
confirm that whether before and
after single block is suitable for
specifications.
Zero movement at corner in
direct draw
Programming error
1. Check machining program
to confirm whether inserted
value of rounding or
chamfer is suitable for
specifications.
2. Check to confirm whether
working plane and round
plane are the same.
Invalid angle amount, A, in
direct draw
Programming error
Check machining program to
confirm that whether angle
amount A is suitable
specifications.
Dot chamfer amount bigger
than displacement
Programming error
1. Check machining program
to confirm whether inserted
value of rounding or
chamfer is suitable for
specifications.
2. Check to confirm whether
working plane and round
plane are the same.
Block end point exceed
software limit
Program error
Check the machining program
and correct coordinate position.