Laguna Tools SmartShop Maker, Owner'S Manual

Page: 55 / 70

SmartShop|Maker Owner’s Manual
55
Error Code Potential Issue(s) Resolution(s)
Not set home position.
Absolute coder will not work Do not use C25~to set the home of
the machine. Absolute encoder to search
home.
Absolute position battery
failure. The battery of absolute encoder
has no power.
Change the battery.
Can’t leave home dog HomeDog is damaged
Use the electrical multimeter to
check whether the sensor of
HomeDog is damaged or wiring
connection is missing.
Second Positive software limit
exceed The motion of machine table
exceeds setting value.
Remove alarm. Move axis in
negative direction out of stroke
protection software.
Second Negative software
limit exceed The motion of machine table
exceeds setting value.
Remove alarm. Move axis in
positive direction out of stroke
protection software.
Inhibit cycle start in moving
Manual command (JOG, INJOG,
and MPGJOG) cannot be sent
successfully. Remove alarm. Wait until
machine stops, then start
machining.
EOF in comment Programming error
Using symbol “(*” before
command and symbol “*)” after
command
No end of string character Programming error
Check PRINT command of
program.
Illegal variable Change error variable
Check program variable and
confirm whether system uses
that variable.
Expression too complex Programming error
Check whether logic is clear and
connect.