1.5HP Mobile Dust Cyclone Manual
29
Below is a list of parts required for conversion to 220 Volt:
-
PDCPF-ACM220V
→
Autoclean motor 220V.
-
PDCPF-ACM220V-C
→
Autoclean capacitor 1.5uF/450VAC
-
PDCPF15110-220-OV
→
Overload protector 15A
- PLUG, 220 Volt (not available from Laguna Tools, local electrician to supply)
1.
Change the wiring within the
1.5HP motor
to 220 Volt wiring according to the wiring diagram located on the
inside cover of the junction box.
2.
Remove the Control panel by loosening the four bolts circled (Fig. 7) to access the box inside.
Figure 7: Control Panel
Figure 8: Control Panel/Box Wiring
3.
Inside the Control Box remove the connectors (L1, M1, 110V RED) (Fig. 9). Also refer to the electrical
diagrams at the end of these instructions for reference.
Summary of Contents for PFLUX1
