Laguna Tools PFLUX1, Manual

Page: 21 / 53

1.5HP Mobile Dust Cyclone Manual
20
9. Secure the lower triangular
support plate to the base using (2)
5/16” x 3/4” hex bolts and (2)
5/16” x18x2mm flat washers. Follow
the same steps for the opposite side.
10. Secure the foot pedal support
bracket to the lower upright support
panel using (2
) 5/16” x 1/2” carriage
bolts, (2) 5 /16” x18x2mm flat washers
and (2 ) 5/16” hex nuts. Make sure
the armrest of the support bracket is
facing up. Follow the same steps for
the opposite side.
11. Locate the two-foot pedal bars
provided. There is a left side and
right side. To identify the correct
side, look for the protruding nut,
circled in red below. It should be
facing upwards when you place the
bars on the floor.
12. Confirm the foot pedal bar is the
correct side and slide the Foot pedal
bar into the opening on the lower
upright support panel. Make sure
the end of the bar is on the inside of
the triangular support plate. Follow
the same steps for the opposite side.
LEFT RIGHT
Side view