Laguna Tools PFLUX1, Manual

Page: 19 / 53

1.5HP Mobile Dust Cyclone Manual
18
1. Place the empty, top, foam
packing insert (which contained the
individual parts) upside-down on
the floor. Place the main unit into
the foam insert upside-down. Make
sure the unit is centered properly
and resting solidly in the foam
insert for the next steps.
2. Remove the base which has been
bolted to the (3) top upright
supports.
3. Turn base upside-down. Use (16)
5/16
” x 3/4 ” hex bolts and (16) 5/16 ”
flat washers. Attach the (2) 4 ” casters
with brakes to the base. The casters
wit brakes should be attached to the
side with the opening. The remaining
(2) 4
” swivel casters must attach to
the other end on the base.
4. Turn the base over with it
standing on the
(4) 4” casters and
secure the three lower upright
support panels using (6) 3/8” x 3/4”
hex bolts and (6) 3/8” x 7/8” flat
washers.
A – shown with one dot is located
on the canister side.
B
– shown with two dots is located
on the front side
C
– shown with three dots is
located on the opposite end.
A
B
C
A
B
C
Swivel caster
Swivel caster
With brakes