Laguna Tools PFLUX1, Manual

Page: 23 / 53

1.5HP Mobile Dust Cyclone Manual
22
17. Secure the topping to the nut on
the foot pedal bar using (1)
M8x30mm hex bolt. Follow this step
on the opposite side.
18. Secure the movable supporting
brace on the foot pedal bar with the
octagon foot peddle using (2)
3/8” x21mm hex bolts. Make sure the
bolt head is on the inside of the
octagon foot pedal. Adjust the
tightness of this bolt accordingly. If
this bolt is too tight, the Octagon
foot pedal will not work smoothly.
When too loose it will not pick up
the Octagon drum.
19. Secure the movable supporting
brace on the foot pedal bar with the
octagon foot pedal using (2)
3/8” x21mm hex bolts. Make sure the
bolt head is on the inside of the
octagon foot peddle. Adjust the
tightness of this bolt accordingly. If
this bolt is too tight, the Octagon
foot pedal will not work smoothly.
When too loose it will not pick up
the Octagon drum.
20. Apply foam tape to the cone
flange before attaching the drum lid.
Secure the Octagon drum lid to the
cyclone funnel using (6) 5/16” x 3/4”
hex bolts, (12) 5/16” x 1” flat washers
and (6) 5/16” hex nuts. Make sure to
first attach all the bolts before
tightening. NOTE: The lid will turn
when the bolts have not been
tightened for alignment. Failure to
do will result in the drum lid not
being able to align with the drum.
Octagon foot pedal
Movable supporting brace
You will find a tag on the cone with
the following warning. Take note
and remove tag when you have
completed this step.