Laguna Tools PFLUX1, Manual

Page: 26 / 53

1.5HP Mobile Dust Cyclone Manual
25
29.
Once completing the assembly,
keep the drum laying on its side to
apply silicone (not included) to the
inside of the drum, including the base
and the top rim of the drum before the
rubber seal has been attached to seal
and prevent air leakages. You will need
to use a caulking gun (not supplied).
30. Attach the rubber gasket to the
top inner edges of the Octagon
drum. The wider end of the gasket
goes up. Use tin snips to trim any
excess rubber gasket after
completing the seal.
31. Insert the plastic debris collection
bag inside the Octagon drum. Open and
spread out the plastic bag to the
corners and edges
32. Use (24) Round head Philips bolts
3/16
” x1/2 ” and (24) Cap nut 3/16 ” to
assemble the drum insert together.
Place the drum insert inside over the
plastic bag in the Octagon drum.
Rubber gasket
Drum insert
Silicone