Lagoon 42, User Manual

Page: 37 / 122

RIGGING / SAILS
35
3
RIGGING / SAILS
n
3.3
Running rigging
The mainsail and jib sheets, the topping lift, the reefing lines, the
mainsail and code 0 halyards, the control lines for the main traveller
are led back to the manoeuvre station.
n
3.2
Standing rigging
The LAGOON 42 has been adjusted by the shipyard and by the mast
manufacturer when first masting.
The cables stretch a little during the first sailings. Therefore it is
advisable to have the mast inspected and adjusted by a specialist.
Before you put out to sea, it is essential to make sure that the standing
rigging is in good condition: inspect the gooseneck, turnbuckles, and
check the condition of the shrouds.
To hoist a crew member up to the top of the mast, use the man
hoisting halyard.
Belay the crew member with a bowline on the bosun’s chair ring (do
not use snap shackle or shackle).
LAGOON 42
RECOMMENDATION
Any intervention on the standing rigging comes
within a specialist remit.
WARNING
The man hoisting halyard which is the only one to be
authorized for this purpose, is only meant to hoist a
crew member up to the top of the mast.
Description of the ropes length (m) diametre (mm)
Jib halyard 41 12
Jib sheet 38 10
Mainsail halyard 57 12
Mainsail topping lift 40 10
Mainsheet 34 14
Mainsail traveller adjustment 19 x 2 10
Reef 1 19 12
Reef 2 32 12
Reef 3 46 12
Boom loop 0,6 10
Code 0 sheet (optional extra) 34 10
Code 0 halyard (optional extra) 65 10