manualshive.com logo in svg

Lagoon 42, User Manual

Share
Download
Lagoon 42 User Manual Download Page 117

MAINTENANCE

115

12

MAINTENANCE

LAGOON 42

ENGINES 

Control the oil and water cooling levels ........................... WHEN USED
Clean the sea water filters ..................................................MONTHLY
Control the fuel prefilters and filters ................................ WHEN USED
Check the belt tension .................................................... WHEN USED
Check the shafts, coupling, stuffing boxes 
and cutlass bearings .................................................................. qUATERLY
Check the anodes, sail drive, and propellers........................MONTHLY
General inspection  ......................REFER TO MANUFACTURER NOTICE

RUDDER SYSTEM 

Check the rudder hydraulic oil level ....................................MONTHLY 
Lubricate the rudder system .............................................. qUATERLY
Control the rudder bearing .................................................... ANNUAL
Control the autopilot oil level ...............................................MONTHLY
Change the autopilot oil ...............REFER TO MANUFACTURER NOTICE

ELECTRICITY

Check, tighten and grease the high load connnections  ...... qUATERLY
Control the nav-lights and inside light (switches) ............ WHEN USED
Clean the speed, depth sensor ............................................MONTHLY

GENERATOR 

Clean the sea water filter ....................................................MONTHLY 
Control the oil and water cooling level ............................. WHEN USED
Check the belt’s tension  ................................................. WHEN USED
Control the leak on exhaust line (smoke and water)  ....... WHEN USED
General inspection by ONAN .................... REFER TO MANUFACTURER 

NOTICE

AIR CONDITIONING 

Clean the sea water filter ....................................................MONTHLY
Check the level and running pressure  ............................ WHEN USED
Clean the condensation drip trays ...................................... qUATERLY
Check the air conditioning compressors .... REFER TO MANUFACTURER 

NOTICE

PLUMBING 

Test the electrical and manual bilge pumps .....................DEPARTURE 
Control the fresh water pumps ............................................MONTHLY
Clean the grey sump box strainers ................. DEPARTURE / MONTHLY
Check, use and lubricate seacocks and valves ....................MONTHLY
Clean grey water collecting boxes ...................................... qUATERLY
Rinse the black water and grey water tanks ....................... qUATERLY
Clean the sumps and engine room bilges ............................MONTHLY
Clean the sea water inlets ...................................................MONTHLY
Control the water heaters ............REFER TO MANUFACTURER NOTICE

WATERMAKER 

Control the sea and fresh water connections ................... WHEN USED
Check and clean the sea water filters .................................MONTHLY
General inspection by the manufacturer ..........REFER TO MANUFACTURER 

NOTICE

Summary of Contents for 42



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands