UNICO 01.07.2019
English / Englisch
5
WORKING WITH THE UNICO
3
Hold the UNICO firmly by the extension and by the machine
handle. Shake the machine so that the dust falls from the
suction pipe stub into the dust bag (fig. 52). Set the machine
down on the floor again.
4
Remove the strain relief ring together with the extension
cable from the cable support (fig. 53, 1).
5
Unhook the sling on the dust bag from the cable support
(fig. 53, 2).
6
Open the loop of the string on the dust bag (fig. 53, 3).
7
Undo the MultiClip fastener by unscrewing the nut (fig. 53, 4).
8
Pull off the dust bag from the pipe stub carefully (fig. 53, 5)
and then use the string to close the dust bag so that no dust
can escape on the way to the emptying location. Remove the
MultiClip fastener.
9
Empty the dust bag into a non-combustible container
outdoors! Whirl up as little dust as possible! Close this
container with a non-combustible cover and store it
outdoors (RISK OF FIRE)!
10
Install the dust bag again as described in
Section 4.1,
Attaching the dust bag
.
Wear also the respiratory protective
mask!
Fig. 53
Removing the dust bag.
Fig. 52
Shake the machine so that the dust falls from the
suction pipe stub into the dust bag.
36