UNICO 01.07.2019
English / Englisch
Fig. 19
Installing the handlebar on the pipe bend.
Fig. 18
Undoing the clamping lever at the pipe bend (1)
and removing the extension (2).
Fig. 17
Removing the handlebar.
Fig. 16
Undoing the clamping lever on the extension.
4.5.2 REMOVING THE EXTENSION
Whenever you want to work in a stooped or kneeling position, you
can also remove the extension and fasten the handlebar directly
to the pipe bend:
1
Switch off the machine and pull the power plug out of the
socket!
2
Undo the clamping lever at the upper end of the extension
(fig. 16).
3
Pull the handlebar out of the clamping piece and remove it
upward (fig. 17). Put the handlebar aside.
4
Undo the clamping lever at the front end of the pipe bend and
pull the extension upward out of the bracket (fig. 18). Put the
extension aside.
4.5.3 INSTALLING THE HANDLEBAR
The handlebar can be installed on the pipe bend in vertical position
as well as in horizontal position.
Handlebar in vertical position:
1
Remove the extension first, as described in the preceding
Section 4.5.2, Removing the extension
.
2
Install the handlebar directly in the bracket on the front end
of the pipe bend (fig. 19). Tighten the clamping lever again.
4
COMMISSIONING
21