No.:GC-JS-21 Version: 01/00
Effective date
：
2020-07-22
20
6.1.2 Program page
You can select the program menu on the main page and press "OK" to enter. The program menu after entering is
as follows:
6.1.3 Programs (totally 7)
4 sterilization programs
：
134
℃
unniversal
，
134
℃
universal quick
，
134
℃
solid
，
121
℃
universal
；
1 dry program
：
dry
2 test programs
：
Vacuum test, to check the leakage of machine;
B-D/helix test, to check the effectiveness of program;
Remarks: For preset parameters of each program, corresponding load information and other information, please
refer to Chapter 5 of this manual.
6.1.3 Settings
You can select the setting menu on the main page and press "OK" to enter. The program menu after entering is as
：
The program menu is for users to use, and it contains
all preset programs;
：
Setting menu, for user. Inside are all
user-configurable items;
：
The service menu is used only by the manufacturer or
the manufacturer's representative, and requires a password to
enter, user cannot enter;
：
Shortcut key, the default is the last
run program, the user can choose here to press the "OK" key to
start the program.
：
cursor
You can press the "Up" or "Down" keys to
move the cursor to the desired program, and
press the "OK" key to run the program.
