II. CONTROLS
AND INSTRUMENTS
INSTRUMENT PANEL
The instrument panel is shown in
Figure 28.
1 –
illumination engineering
control module
(see Section
«Illumination Engineering Control
Module and Headlight Adjuster»).
2 –
light alarm switch.
3 –
driver’s air bag module
includes an intergrated system
with castenets-like horn.
4 –
instrument cluster
(see
Section «Instrument Cluster»).
5 –
wiper switch.
6 –
ignition starter switch
(see
Section «Ignition Starter Switch»).
7 –
light alarm switch.
To turn on
the light alarm, press the switch key-
button; to turn it off, repress the
switch key-button.
When activating the light alarm all
turn indicators are in operation. The
light alarm warns that at the moment
the transport mean poses a danger
to other road users. The light alarm
operates under all key positions in
the ignition starter switch.
8 –
glove box cover.
9 –
ventilation and heating sys-
tem control panel in the passen-
ger compartment.
10 –
system electronic stability
control switch
(in the design vari-
ant).
After the engine start-up the
electronic stability control (ESC)
function and anti-skidding function
are activated automatically. To dis-
able the functions, press and hold
down the switch button in the
depressed position for 2-3 seconds.
At that, the ESC OFF indicator will
flash on the
instrument cluster
(see Section «Instrument Cluster»).
The enabling of functions is carried
out by re-pressing the switch button.
11 –
rear window heating
switch.
The rear window heating
switch operates only when setting
the key in the ignition starter switch
to position I. To switch on the heating
press the switch key-button, to
switch off the heating, repress the
switch key-button.
In case, when the heater is actuat-
ed, the key in the ignition starter
switch is turned to position 0, the
heating function is deactivated.
When restarting the engine the heat-
ing function is restored without
pressing the switch key-button.
The check light signal indicator
located on the switch key-button will
glow orange for the duration of the
heater operation.
In the design variant
during the
rear window heating activation the
exterior mirrors heating is also
switched on.
In the design variant,
the rear
window heater and the electric mir-
ror heaters are activated only when
the engine is running.
ATTENTION
!
1. To avoid discharging the
storage battery, do not switch on
the rear window heater for a
longer period of time than it is
necessary.
2. When cleaning the rear win-
dow inner surface do not use
sharp objects, as well as cleaning
agents containing abrasives, for
they can damage the conductors
applied to the glass.
12 –
windshield electrical heat-
ing switch
(in the design variant)
(see Section «Passengers' Com-
partment Ventilation and Heating
Systems»).
13 –
conditioner switch
(in the
design variant)
(see Section
34
Summary of Contents for GRANTA
