Lada GRANTA, User Manual

Page: 59 / 140

– handle 2 (see Fig. 38) should
be turned counter-clockwise to the
extreme left position up to stop (red
mark point on the control unit), and
in the design variant handle 2 (see
Fig. 40) – clockwise to the extreme
right position up to stop (red mark
point);
– handle 4 should be set to posi-
tion ;
– handle 1 of the electric heater
fan operation mode switch set to
maximum speed of the air supply to
the passenger compartment;
– open the side and central noz-
zles.
Providing comfort temperature
in the passenger compartment
Once the windows have been
cleaned, and the passenger com-
partment temperature has reached
the desired level, it is recommended
to do the following:
– by rotating handle 2 set the
desired temperature;
– handle 4 should be set to posi-
tion ;
– by rotating electric heater fan
switch handle 1 select the desired
rate of hot air supply to the passen-
ger compartment.
ATTENTION!
To ensure good operation of
the heating and ventilation sys-
tem, regularly clean the openings
for fresh air intake of snow, ice
and leaves, located in front of the
windshield.
Prevent the increase of the air
moisture in the passenger com-
partment against evaporation of
water and snow from carpets and
rubber mats and clean them in
time. Keep the vehicle windows
clean, for the dirty windows accu-
mulate more air moisture, and they
thaw longer.
Do not contaminate the vents
for exhaust air in the luggage
compartment side trimming.
When the heating system oper-
ates at full capacity, it is not rec-
ommended to open the windows.
Trouble-free operation of heat-
ing and ventilation system control
is provided with strict adherence
to the above sequence of its han-
dles switching.
Climate system control
features
Climate system control makes it
possible to provide heating as well as
ventilation of the air supplied to the
vehicle passenger compartment.
Upon that, the air temperature and
moisture reduction in relation to the
outside air is reached in the passen-
ger compartment, and also dust and
other volatile solids are removed.
1 – electric fan operation mode
switch handle.
2 – heater temperature mode
switch handle.
3 – recirculation shutter control
lever handle.
4 – air flow distributor control
handle.
5 – conditioner switch key.
6 – windshield electrical heat-
ing switch key (n the design vari-
ant).
When the air conditioner works
defogging is carried out more effec-
tively, especially when outside air
moisture is high.
To activate the cooling function
(air conditioning function) with the
windows closed:
57