Lada GRANTA, User Manual

Page: 21 / 140

Before the back seat (or its part)
folding up it is necessary to install
the safe belt locks into the seat belt
holders in the seat back bottom
part. When the seat back return to
its operating position make sure
that the shoulder branches of side
belts have not fallen behind the
back. After the seat back return
to its operating position the belt
locks must be removed from the
seat belt holders.
Warning
Do not allow the seat belts
location behind the seat back
when you return it to the operat-
ing position to provide their future
intended use and to avoid the belt
bands damage with the seat back
lock.
The rear seat folding down should
be carried out in the following
sequence:
– pull the strap 4 (Fig. 11a, Fig.
11b) and set the seat cushion 1 to
the vertical position. Move the front
seats forward, if necessary;
– pull the lock drive lever 3 and
fold down the back 2 to the horizon-
tal position.
Setting the rear seat to its normal
position must be carried out in the
reverse order.
In the design variant, each of
two seat parts can be folded down
separately, if necessary. During fold-
ing up of any rear seat part for goods
transportation, only one passenger
can be placed in the remaining part.
STEERING WHEEL
POSITION ADJUSTMENT
(in the design variant)
In the design variant, the vehicle
is equipped with the tilt steering col-
umn. For selection of the optimum
steering wheel position, pull down
locking handle 1 (Fig. 12) and, after
setting the steering wheel to the
desired position, fix the steering col-
umn by moving the handle to its
highest position.
Warning
Steering column adjustment
must be carried out only in the
stationary vehicle.
2*
19
Fig. 12. Steering wheel position
adjustment
(in the design variant)